Fast, licensed fire water damage cleanup in Pacoima
Water damage remediation after fire in Pacoima, California
When a fire hits your Pacoima home or business, the water left behind by sprinklers and hoses can cause as much damage as the flames. Our team provides water damage remediation after fire in Pacoima, California, handling extraction, drying, and smoke and water damage cleanup Pacoima residents trust. We're available 24/7 to stop mold, warped floors, and structural rot before they start.
Live phone supportUpfront optionsBacked workmanship
What's included
What's included in water damage remediation after fire
Our standard service covers extraction, drying, cleaning, and documentation. We also offer add-ons like reconstruction and duct cleaning. Here's what you get when you hire us.
Emergency water extraction
We remove standing water using truck-mounted extraction units and wet vacuums. This includes water from carpets, hardwood floors, and subflooring. We also extract water from crawl spaces and basements.
Structural drying
We set up industrial dehumidifiers and air movers to dry walls, ceilings, and floors. We monitor moisture daily with moisture meters and hygrometers. Drying typically takes 3 to 5 days.
Antimicrobial treatment
We apply EPA-registered antimicrobial solution to all affected surfaces. This kills mold spores and bacteria that can cause health problems. We also use a bore scope to check inside walls.
Smoke and odor removal
We use HEPA vacuums and air scrubbers to remove smoke particles and odors. This includes cleaning walls, ceilings, and ductwork. We also use negative air machines to prevent cross-contamination.
Insurance documentation
We provide a detailed report with photos, moisture readings, and Xactimate estimates. This helps your insurance claim get approved faster. We also communicate directly with your adjuster.
Final moisture check
We perform a final inspection to ensure all materials are dry. We provide a certificate of completion for your records. If reconstruction is needed, we can coordinate with licensed contractors.
Service overview
What water damage remediation after fire in Pacoima, California involves
Water damage remediation after fire in Pacoima, California is the specialized cleanup that removes standing water, dries saturated materials, and neutralizes smoke residue after a fire. It's not the same as standard water cleanup. Firefighting water carries soot, ash, and chemicals deep into drywall, insulation, and subflooring. We use water extraction units, industrial dehumidifiers, and air movers to pull moisture out fast, then apply antimicrobial solution to stop mold growth. Every step follows ANSI/IICRC S500 standards.
Pacoima's older housing stock and hot, dry summers create a specific risk: fire sprinkler discharge and hose water soak into walls and attics, then temperatures above 95°F accelerate mold growth within 24 to 48 hours. Homeowners near the San Fernando Road Corridor often call us after kitchen fires or garage blazes. If you search for fire water damage cleanup Pacoima California 24/7, we answer. We also handle post fire water damage restoration Pacoima California for landlords and property managers.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
Our water damage remediation after fire process
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency call & assessment
You call (833) 321-7153 and speak to a live dispatcher. We ask about the fire, water source, and any visible damage. Within 60 to 90 minutes, a technician arrives with a moisture meter, thermal imaging camera, and hygrometer. We inspect the entire structure, including attic and crawl space, and give you a written scope before work begins.
Water extraction & removal
We deploy water extraction units and wet vacuums to remove standing water from floors, carpets, and subflooring. For deep saturation, we use a sump pump or negative air machine. This step typically takes 2 to 4 hours for an average 1,200-square-foot home. We also remove any unsalvageable materials like soaked drywall or insulation.
Drying & dehumidification
We set up industrial dehumidifiers and air movers to dry the structure. Desiccant dehumidifiers may be used in tight spaces like crawl spaces. We monitor moisture levels daily with a moisture meter and hygrometer. Drying usually takes 3 to 5 days, depending on humidity and material density. You'll get daily updates on progress.
Cleaning & antimicrobial treatment
Once dry, we apply antimicrobial solution to all affected surfaces to kill mold spores and bacteria. We use a bore scope to check inside walls for hidden moisture. Smoke and water damage cleanup Pacoima includes HEPA vacuuming and odor removal. This step takes 1 to 2 days and ensures your home is safe to live in.
Final inspection & restoration
We perform a final moisture check and provide a certificate of completion. If reconstruction is needed, like replacing drywall or baseboard, we coordinate with licensed contractors. We also help you file your insurance claim with Xactimate documentation. Most jobs are fully complete within 7 to 10 days from the first call.
Tools & methods
Professional tools and methods we use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Dri-Eaz dehumidifiers
We use these industrial-grade dehumidifiers to remove moisture from the air. They can extract up to 130 pints per day, speeding up drying.
Phoenix Restoration air movers
These high-velocity air movers circulate air to dry walls, floors, and ceilings. We position them strategically for maximum airflow.
Milwaukee moisture meters
We use these to measure moisture content in wood, drywall, and concrete. They help us determine when materials are fully dry.
Thermal imaging camera
This camera detects temperature differences to find hidden water behind walls. It's essential for locating leaks without demolition.
RIDGID wet vacuum
We use this for extracting water from carpets and hard floors. It's powerful enough to remove deep-seated moisture.
Bore scope
We insert this camera into small holes to inspect inside walls and ceilings. It helps us find moisture and mold in hard-to-reach areas.
Negative air machine
We use this to create negative pressure in contaminated areas. It prevents mold spores and odors from spreading to clean areas.
Use cases
When you need water damage remediation after fire in Pacoima
These examples show how the service framework adapts rather than forcing every call through one repair.
Garage fire in Hansen Hills
A garage fire melted pipes, causing a burst that flooded the garage and adjacent laundry room. Water seeped into the foundation, and mold started growing within 48 hours. → We extracted 150 gallons of water, removed mold with antimicrobial treatment, and dried the concrete. The foundation was sealed with a moisture barrier. The garage was dry in 5 days.
Attic fire in Shadow Hills
An attic fire caused water from hoses to soak insulation and rafters. The ceiling below showed water stains, and the attic had a musty odor. → We removed wet insulation, dried the rafters with air movers, and applied antimicrobial solution. The ceiling was repaired and repainted. The attic was dry in 6 days.
Problems we solve
Common problems we solve after a fire in Pacoima
Fire water damage creates a unique set of problems. We handle them all, from hidden moisture to mold growth.
Hidden moisture behind walls
We use thermal imaging cameras and moisture meters to find hidden water. Then we use directed air movers and dehumidifiers to dry inside wall cavities. We also use a bore scope to inspect hard-to-reach areas.
Mold growth within 24 hours
We apply antimicrobial solution immediately after extraction. We also set up containment barriers to prevent spores from spreading. Our IICRC AMRT technicians ensure mold is fully remediated.
Water-stained ceilings and walls
We locate the source, dry the area, and repair or replace damaged drywall. We also seal stains with moisture-resistant primer. This restores your home's appearance and prevents future problems.
Warped hardwood floors
We use specialized drying mats and air movers to dry hardwood floors slowly. This minimizes warping and saves the wood. If replacement is needed, we can recommend local flooring experts.
Pricing process
How much does water damage remediation after fire cost in Pacoima?
$2,500 - $8,000 depending on scope
Square footage affected
Larger areas require more equipment and labor. A 500-square-foot area might cost $2,500, while a 2,000-square-foot area can reach $8,000.
Water category
Category 1 (clean water) is cheaper to remediate than Category 3 (sewage). Category 3 requires additional disinfection and disposal costs.
Duration of water exposure
If water sat for more than 48 hours, mold may have started. This adds remediation costs and may require replacing materials.
How much does water damage remediation after fire cost in Pacoima California?
Most residential jobs in Pacoima range from $2,500 to $8,000, depending on square footage and contamination level. A small kitchen fire with minor water might cost $2,500, while a whole-house fire with sprinkler discharge can exceed $8,000. We provide a free, no-obligation estimate before any work begins. Insurance often covers most of the cost.
How do I clean up water damage after a fire in Pacoima?
You shouldn't tackle it alone. Fire water contains soot, ash, and chemicals that require professional extraction and antimicrobial treatment. First, shut off power and water if safe. Then call us at (833) 321-7153. We remove standing water, dry the structure with industrial dehumidifiers, and apply antimicrobial solution to prevent mold. DIY shop-vacs can't reach hidden moisture.
Does insurance cover fire water damage cleanup in Pacoima California?
Yes, most homeowner policies cover fire water damage cleanup in Pacoima California as part of the fire claim. We work with all major carriers and provide Xactimate documentation to support your claim. We recommend calling your insurer after you call us. We'll handle the technical details and communicate directly with your adjuster.
How long does post fire water damage restoration take in Pacoima?
Typical post fire water damage restoration in Pacoima takes 5 to 10 days from start to finish. Extraction takes 2 to 4 hours, drying takes 3 to 5 days, and cleaning adds 1 to 2 days. If reconstruction is needed, like replacing drywall, add another 3 to 5 days. We give you a written timeline after our initial assessment.
Related services
Related Services
flood restoration services
Flooding after a fire can come from burst pipes or firefighting water. We handle full flood restoration, including extraction, drying, and sanitizing. For Pacoima properties, we also check for foundation seepage and slab leaks that can worsen after a fire.
emergency water removal
When water is still rising, every minute counts. Our emergency water removal team uses truck-mounted extraction units to pull hundreds of gallons quickly. We serve all Pacoima neighborhoods, including Arleta and Sun Valley, 24/7.
mold remediation after water damage
Mold can start within 24 hours of water damage. We use IICRC AMRT protocols to remove mold growth and prevent it from returning. This is critical after a fire, when wet drywall and insulation create ideal conditions for spores.Ready when you are
Get water damage remediation after fire in Pacoima, California today
Call (833) 321-7153 now for 24/7 emergency service. We're licensed, insured, and ready to respond. Same-day estimates, no obligation. Don't wait; mold can start in 24 hours.
Talk with the local team
Request water damage remediation after fire
Call (833) 321-7153 any time, day or night. Our dispatcher answers live and sends the closest crew, with most Pacoima addresses reached within 60 to 90 minutes. You can also email photos of the damage to info@waterdamagerestorationpacoima.com and we will call you back with next steps.